Was für Musik hört Ihr gerade so?
am 08.05.2020 16:02
Benachrichtigung
Gerade eben.
Neueste Beiträge
Was für Musik hört Ihr gerade so?
am 08.05.2020 15:56
von
(Gelöschter Nutzer)
am 8. Mai 2020 15:56
im Radio läuft..
Imagine Dragons- Thunder
Imagine Dragons- Thunder
0
0
Probleme mit Emailprogrammen
am 08.05.2020 12:21
von
hbss
am 8. Mai 2020 12:21
[ 3.157509] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.157659] hub 7-0:1.0: USB hub found
[ 3.157668] hub 7-0:1.0: 2 ports detected
[ 3.184389] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.184398] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.184410] ehci-pci 0000:00:1d.7: debug port 1
[ 3.188319] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.188326] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf01a5400
[ 3.468068] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.468209] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.470382] ata1.00: ATA-7: ST3160815AS, 3.CHH, max UDMA/100
[ 3.470384] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.481127] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.481252] ata1.00: configured for UDMA/100
[ 3.481425] scsi 0:0:0:0: Direct-Access ATA ST3160815AS H PQ: 0 ANSI: 5
[ 3.491751] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.491872] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, RB02, max UDMA/100
[ 3.516227] ata2.00: configured for UDMA/100
[ 3.525497] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L RB02 PQ: 0 ANSI: 5
[ 3.536036] random: fast init done
[ 3.539610] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.539664] sd 0:0:0:0: [sda] Write Protect is off
[ 3.539667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.539690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.563886] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.563889] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.564075] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.570232] sda: sda1 sda2 < sda5 >
[ 3.570673] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.880040] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.880151] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.880153] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.880155] usb usb8: Product: EHCI Host Controller
[ 3.880156] usb usb8: Manufacturer: Linux 4.9.0-12-686-pae ehci_hcd
[ 3.880158] usb usb8: SerialNumber: 0000:00:1d.7
[ 3.880343] hub 8-0:1.0: USB hub found
[ 3.880353] hub 8-0:1.0: 6 ports detected
[ 3.908121] hub 4-0:1.0: USB hub found
[ 3.908132] hub 4-0:1.0: 2 ports detected
[ 3.936147] hub 6-0:1.0: USB hub found
[ 3.936158] hub 6-0:1.0: 2 ports detected
[ 3.964119] hub 7-0:1.0: USB hub found
[ 3.964130] hub 7-0:1.0: 2 ports detected
[ 4.000052] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[ 4.188075] usb 1-2: New USB device found, idVendor=046d, idProduct=c077
[ 4.188080] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.188084] usb 1-2: Product: USB Optical Mouse
[ 4.188087] usb 1-2: Manufacturer: Logitech
[ 4.193032] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.205491] usbcore: registered new interface driver usbhid
[ 4.205492] usbhid: USB HID core driver
[ 4.206443] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/0003:046D:C077.0001/input/input3
[ 4.206540] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 4.224330] PM: Starting manual resume from disk
[ 4.224335] PM: Hibernation image partition 8:5 present
[ 4.224336] PM: Looking for hibernation image.
[ 4.224734] PM: Image not found (code -22)
[ 4.224735] PM: Hibernation image not present or could not be loaded.
[ 4.610332] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.007810] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.110145] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.110285] systemd[1]: Detected architecture x86.
[ 6.120367] systemd[1]: Set hostname to <ah>.
[ 6.442735] random: crng init done
[ 6.442738] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.334330] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 7.334424] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.334610] systemd[1]: Created slice User and Session Slice.
[ 7.334667] systemd[1]: Listening on udev Control Socket.
[ 7.334707] systemd[1]: Listening on udev Kernel Socket.
[ 7.334755] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.334799] systemd[1]: Listening on Syslog Socket.
[ 8.000728] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.374325] lp: driver loaded but no devices found
[ 8.390796] RPC: Registered named UNIX socket transport module.
[ 8.390798] RPC: Registered udp transport module.
[ 8.390799] RPC: Registered tcp transport module.
[ 8.390800] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.408693] systemd-journald[196]: Received request to flush runtime journal from PID 1
[ 8.420573] ppdev: user-space parallel port driver
[ 11.271864] wmi: Mapper loaded
[ 11.347415] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.410293] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 11.410297] ACPI: Power Button [PBTN]
[ 11.410368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.410370] ACPI: Power Button [PWRF]
[ 11.570796] [drm] Initialized
[ 12.249566] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.390639] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.390685] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.511712] iTCO_vendor_support: vendor-support=0
[ 12.561937] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.561982] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0xf860)
[ 12.562209] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.711764] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 12.993729] pci 0000:00:00.0: Intel Q33 Chipset
[ 12.993751] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 12.994249] pci 0000:00:00.0: detected 8192K stolen memory
[ 12.994294] [drm] Memory usable by graphics device = 512M
[ 12.994298] [drm] Replacing VGA console driver
[ 12.995123] Console: switching to colour dummy device 80x25
[ 12.995204] [drm] ACPI BIOS requests an excessive sleep of 522518232 ms, using 1500 ms instead
[ 12.995254] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.995254] [drm] Driver supports precise vblank timestamp query.
[ 12.995519] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.998091] intel_powerclamp: No package C-state available
[ 12.998194] [drm] RC6 disabled, disabling runtime PM support
[ 12.998208] [drm] initialized overlay support
[ 12.998720] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 12.998845] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 12.999065] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 13.036379] intel_powerclamp: No package C-state available
[ 13.070717] fbcon: inteldrmfb (fb0) is primary device
[ 13.137536] Console: switching
[ 13.137539] to colour frame buffer device 160x64
[ 13.159264] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.370864] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 13.370867] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 13.370870] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 13.370871] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 13.370872] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 13.370874] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 13.370876] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 13.381184] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.381482] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.381566] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.381645] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.382109] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 14.177334] Adding 6250492k swap on /dev/sda5. Priority:-1 extents:1 across:6250492k FS
[ 15.248189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.320920] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.321067] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.438905] NET: Registered protocol family 4
[ 28.483563] NET: Registered protocol family 3
[ 28.523558] NET: Registered protocol family 5
[ 32.915543] fuse init (API version 7.26)
[ 563.234607] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 597.255283] perf: interrupt took too long (3144 > 313😎, lowering kernel.perf_event_max_sample_rate to 63500
[ 641.137511] perf: interrupt took too long (3934 > 3930), lowering kernel.perf_event_max_sample_rate to 50750
[ 798.345880] perf: interrupt took too long (4920 > 4917), lowering kernel.perf_event_max_sample_rate to 40500
[ 2839.398540] traps: chrome[2436] trap invalid opcode ip:2307d34 sp:bfd75e10 error:0
[ 2839.398549] in chrome[455000+6578000]
[ 2926.395168] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=174828 end=174829) time 220 us, min 1017, max 1023, scanline start 1011, end 1025
[ 2928.511206] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=174955 end=174956) time 160 us, min 1017, max 1023, scanline start 1015, end 1025
[14232.765949] traps: chrome[6197] trap invalid opcode ip:2307d34 sp:bfd75e10 error:0
[14232.765958] in chrome[455000+6578000]
root@ah:/home/
Das kam.
Danke für Hilfe.
[ 3.157659] hub 7-0:1.0: USB hub found
[ 3.157668] hub 7-0:1.0: 2 ports detected
[ 3.184389] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.184398] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.184410] ehci-pci 0000:00:1d.7: debug port 1
[ 3.188319] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.188326] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf01a5400
[ 3.468068] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.468209] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.470382] ata1.00: ATA-7: ST3160815AS, 3.CHH, max UDMA/100
[ 3.470384] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.481127] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.481252] ata1.00: configured for UDMA/100
[ 3.481425] scsi 0:0:0:0: Direct-Access ATA ST3160815AS H PQ: 0 ANSI: 5
[ 3.491751] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.491872] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, RB02, max UDMA/100
[ 3.516227] ata2.00: configured for UDMA/100
[ 3.525497] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L RB02 PQ: 0 ANSI: 5
[ 3.536036] random: fast init done
[ 3.539610] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.539664] sd 0:0:0:0: [sda] Write Protect is off
[ 3.539667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.539690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.563886] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.563889] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.564075] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.570232] sda: sda1 sda2 < sda5 >
[ 3.570673] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.880040] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.880151] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.880153] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.880155] usb usb8: Product: EHCI Host Controller
[ 3.880156] usb usb8: Manufacturer: Linux 4.9.0-12-686-pae ehci_hcd
[ 3.880158] usb usb8: SerialNumber: 0000:00:1d.7
[ 3.880343] hub 8-0:1.0: USB hub found
[ 3.880353] hub 8-0:1.0: 6 ports detected
[ 3.908121] hub 4-0:1.0: USB hub found
[ 3.908132] hub 4-0:1.0: 2 ports detected
[ 3.936147] hub 6-0:1.0: USB hub found
[ 3.936158] hub 6-0:1.0: 2 ports detected
[ 3.964119] hub 7-0:1.0: USB hub found
[ 3.964130] hub 7-0:1.0: 2 ports detected
[ 4.000052] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[ 4.188075] usb 1-2: New USB device found, idVendor=046d, idProduct=c077
[ 4.188080] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.188084] usb 1-2: Product: USB Optical Mouse
[ 4.188087] usb 1-2: Manufacturer: Logitech
[ 4.193032] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.205491] usbcore: registered new interface driver usbhid
[ 4.205492] usbhid: USB HID core driver
[ 4.206443] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/0003:046D:C077.0001/input/input3
[ 4.206540] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 4.224330] PM: Starting manual resume from disk
[ 4.224335] PM: Hibernation image partition 8:5 present
[ 4.224336] PM: Looking for hibernation image.
[ 4.224734] PM: Image not found (code -22)
[ 4.224735] PM: Hibernation image not present or could not be loaded.
[ 4.610332] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.007810] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.110145] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.110285] systemd[1]: Detected architecture x86.
[ 6.120367] systemd[1]: Set hostname to <ah>.
[ 6.442735] random: crng init done
[ 6.442738] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.334330] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 7.334424] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.334610] systemd[1]: Created slice User and Session Slice.
[ 7.334667] systemd[1]: Listening on udev Control Socket.
[ 7.334707] systemd[1]: Listening on udev Kernel Socket.
[ 7.334755] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.334799] systemd[1]: Listening on Syslog Socket.
[ 8.000728] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.374325] lp: driver loaded but no devices found
[ 8.390796] RPC: Registered named UNIX socket transport module.
[ 8.390798] RPC: Registered udp transport module.
[ 8.390799] RPC: Registered tcp transport module.
[ 8.390800] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.408693] systemd-journald[196]: Received request to flush runtime journal from PID 1
[ 8.420573] ppdev: user-space parallel port driver
[ 11.271864] wmi: Mapper loaded
[ 11.347415] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.410293] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 11.410297] ACPI: Power Button [PBTN]
[ 11.410368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.410370] ACPI: Power Button [PWRF]
[ 11.570796] [drm] Initialized
[ 12.249566] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.390639] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.390685] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.511712] iTCO_vendor_support: vendor-support=0
[ 12.561937] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.561982] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0xf860)
[ 12.562209] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.711764] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 12.993729] pci 0000:00:00.0: Intel Q33 Chipset
[ 12.993751] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 12.994249] pci 0000:00:00.0: detected 8192K stolen memory
[ 12.994294] [drm] Memory usable by graphics device = 512M
[ 12.994298] [drm] Replacing VGA console driver
[ 12.995123] Console: switching to colour dummy device 80x25
[ 12.995204] [drm] ACPI BIOS requests an excessive sleep of 522518232 ms, using 1500 ms instead
[ 12.995254] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.995254] [drm] Driver supports precise vblank timestamp query.
[ 12.995519] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.998091] intel_powerclamp: No package C-state available
[ 12.998194] [drm] RC6 disabled, disabling runtime PM support
[ 12.998208] [drm] initialized overlay support
[ 12.998720] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 12.998845] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 12.999065] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 13.036379] intel_powerclamp: No package C-state available
[ 13.070717] fbcon: inteldrmfb (fb0) is primary device
[ 13.137536] Console: switching
[ 13.137539] to colour frame buffer device 160x64
[ 13.159264] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.370864] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 13.370867] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 13.370870] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 13.370871] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 13.370872] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 13.370874] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 13.370876] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 13.381184] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.381482] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.381566] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.381645] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.382109] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 14.177334] Adding 6250492k swap on /dev/sda5. Priority:-1 extents:1 across:6250492k FS
[ 15.248189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.320920] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.321067] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.438905] NET: Registered protocol family 4
[ 28.483563] NET: Registered protocol family 3
[ 28.523558] NET: Registered protocol family 5
[ 32.915543] fuse init (API version 7.26)
[ 563.234607] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 597.255283] perf: interrupt took too long (3144 > 313😎, lowering kernel.perf_event_max_sample_rate to 63500
[ 641.137511] perf: interrupt took too long (3934 > 3930), lowering kernel.perf_event_max_sample_rate to 50750
[ 798.345880] perf: interrupt took too long (4920 > 4917), lowering kernel.perf_event_max_sample_rate to 40500
[ 2839.398540] traps: chrome[2436] trap invalid opcode ip:2307d34 sp:bfd75e10 error:0
[ 2839.398549] in chrome[455000+6578000]
[ 2926.395168] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=174828 end=174829) time 220 us, min 1017, max 1023, scanline start 1011, end 1025
[ 2928.511206] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=174955 end=174956) time 160 us, min 1017, max 1023, scanline start 1015, end 1025
[14232.765949] traps: chrome[6197] trap invalid opcode ip:2307d34 sp:bfd75e10 error:0
[14232.765958] in chrome[455000+6578000]
root@ah:/home/
Das kam.
Danke für Hilfe.
0
0
Suche cuneros.de Werber (die zweite sry ;) )
am 08.05.2020 11:58
Probleme mit Emailprogrammen
am 08.05.2020 10:46
von
bastie
am 8. Mai 2020 10:46
nunja, dein problem ist:
darum geht es auf der Seite nicht.
Internal error in memory allocation klingt auf jeden Fall nicht gut.
Gib mal dmesg in einer Konsole ein, direkt nachdem du versucht hast die Verbindung aufzubauen und kopiere die letzten ~50 Zeilen hier rein.
** (claws-mail:1747:sunglasses:: WARNING **: SSL/TLS connection failed (Internal error in memory allocation.)
darum geht es auf der Seite nicht.
Internal error in memory allocation klingt auf jeden Fall nicht gut.
Gib mal dmesg in einer Konsole ein, direkt nachdem du versucht hast die Verbindung aufzubauen und kopiere die letzten ~50 Zeilen hier rein.
0
0
Probleme mit Emailprogrammen
am 08.05.2020 10:32
von
hbss
am 8. Mai 2020 10:32
Hallo
Den Verdacht hatte ich auch.
Habs gestern gemacht,
machs nochmal.
Danke.
Was meinst Du dazu?
https://www.claws-mail.org/faq/index.php/SSL/TLS_certificate_verification_errors
Verstehe kein Wort.
Den Verdacht hatte ich auch.
Habs gestern gemacht,
machs nochmal.
Danke.
Was meinst Du dazu?
https://www.claws-mail.org/faq/index.php/SSL/TLS_certificate_verification_errors
Verstehe kein Wort.
0
0
Was für Musik hört Ihr gerade so?
am 08.05.2020 09:11
von
Josey1208
am 8. Mai 2020 09:11
Im Radio läuft gerade "Smooth Criminal" von Michael Jackson.
0
0
Probleme mit Emailprogrammen
am 08.05.2020 08:57
von
bastie
am 8. Mai 2020 08:57
debian sagtest du? apt-get update && apt-get upgrade ?
Kann sein, dass es einen bug im gnutls gibt.
Kann sein, dass es einen bug im gnutls gibt.
0
0
Probleme mit Emailprogrammen
am 08.05.2020 08:42
von
hbss
am 8. Mai 2020 08:42
Du meinst die Einstellungen?
SSL-TLS verwenden
Mittels Starttls verschlüsselte Sitzung einleiten
Gültige TLS SSL automatisch akzeptieren.
POP Port 995.
Bis vorgestern ging es.
Anderer Rechner
andere Email AD tut alles.
Danke.
SSL-TLS verwenden
Mittels Starttls verschlüsselte Sitzung einleiten
Gültige TLS SSL automatisch akzeptieren.
POP Port 995.
Bis vorgestern ging es.
Anderer Rechner
andere Email AD tut alles.
Danke.
0
0
Tauziehen
am 08.05.2020 08:41
Tauziehen
am 08.05.2020 07:51
von
Lohengrin
am 8. Mai 2020 07:51
98
0
0
Suche Cuneros - biete Klammlose Kurs : 10K /24,0 Mrd
am 08.05.2020 07:21
von
Wanderfalke
am 8. Mai 2020 07:21
Lose bitte wie besprochen.
Cuneros kommen dann.
Danke
Cuneros kommen dann.
Danke
0
1
Tauziehen
am 08.05.2020 07:15
von
Wanderfalke
am 8. Mai 2020 07:15
97
0
0
Suche cuneros.de Werber (die zweite sry ;) )
am 08.05.2020 02:14
von
Cuneros.de Foren-Team (Wanderfalke)
am 8. Mai 2020 02:14
bewegendes4uBis dahin stimme ich Dir zu, aber da wir keine Sekunden-Anzeige haben, ist das EndeDas Gebot vom Eisbär ist ungültig, da die Mindesterhöhung von 2.000 nicht gegeben wurde. Das Auktionsende ist um 23:00
maximal 23:00:59 Uhr und drahousku hat somit gewonnen.
0
1
Dies ist eine offizielle Antwort des Cuneros.de Foren-Teams
Offizieller Money4Cuneros.de Thread
am 07.05.2020 23:36